formply plywood and formply nz for formply nelson

2018-09-18 21:27:54 formply plywood 3085

Formply plywood is structural plywood overlaid on both sides with a resin-impregnated film that has been fused into the surface veneer under heat and pressure. The resulting surface proves to be resistant to moisture making it particularly suitable for repeated use in concrete formwork. Its tough surface resists the scouring action of aggregates for longer than raw wood and is able to resist the attack of alkaline elements contained in concrete even after repeated pours.

plywood | film faced plywood | construction plywood  |  Formply

formply plywood is dimensionally stable, rigid, light, and easy to install. The cross laminated structure of Formply utilises the inherent strength of wood along its grain, to provide stability even under moisture and temperature changes.

Large areas of Formply can be laid minimising problems associated with swelling and expansion.

formply plywood is easily sawn, bored and shaped with standard woodworking tools providing advantages and forming difficult areas.

The cross – laminated panels are resistant to puncture caused by impact loads because of the very high strength and stiffness to weight ratios.

formply plywood possesses many physical and mechanical properties, which make it both, cost competitive and very suitable for formwork application.

formply NZ overlay are edge sealed during manufacturing. If you to cut during used, it is recommended that fresh edges be re-sealed to avoid panel damage caused by capillary penetration of humidity.

Use the appropriate form remover (same as recommended, chemical reactive releases form non porous surfaces).

Although cleaning a Tulsa Overlay Panel is much easier and quicker than traditional form materials, it is important to only use fiber spatulas and synthetic materials when cleaning forms to prevent damage to the faces which might occur with metallic tools.

Although Tulsa Premium Overlay panels are very resistant to the abrasion and impact, as with any highly finished surface, care must be taken during cleaning and use to prevent damage. Always use the appropriate vibrators and techniques to protect panel’s surface.

formply nelson technical Specs

Designed to achieve concrete forming that results in exceptional surface finishes at a low cost.

Allows between 20 to reuses ( when reasonable care in use and handling is taken).

Overlayed with brown film of 120 mgs/ m2.

65% phenolic resin



12 mm = 15 / 32’’

15 mm = 19 / 32’’

18 mm = 23 / 32’’


Width 1,22 mt = 4’’

Length 2,44 mt = 8’’

During manufacturing, panel humidity is controlled and stabilized to 8%.

For more info on formply plywood | formply nz | formply nelson, please take a look at these page :

affiliate line

Contact us directly :

Recommend Products
plywood | film faced plywood | construction plywood  |  Formply

SENSO formply - High quality formply

formply | formwork plywood | F17 formply | 1200x2400 plywood | 1200x1800plywood | structural plywood

SENSO Enterprise News


News Information
Leave a Reply

SENSO profile

Jiangsu Senso Building Materials Co.,Ltd. (SENSO) is one of largest manufacturer of plywood and related products in China, which was founded in 1995 with 6 subsidiaries. We are now enjoying 62 production lines of film faced plywood ,commercial plywood and LVL.......

More information

Contact us

  • SENSO center , Pizhou City,Jiangsu Province, China
  • 0086-516-86098999