formply nelson and formply mitre 10 for formply masters

2018-10-01 12:00:21 formply nelson 667

formply nelson and formply mitre 10 for formply masters

plywood | film faced plywood | construction plywood  |  Formply

SENSO Formply Nelson Technical Specs
• Designed to achieve concrete forming that results in exceptional surface finishes at a low cost.
• Allows between 20 to reuses ( when reasonable care in use and handling is taken).
• Overlayed with brown film of 120 mgs/ m2.
• 65% phenolic resin

• Tulsa Standard Film panels are edge sealed during manufacturing. If you have to cut during use, it is
recommended that the fresh edges be re-sealed to avoid panel damage caused by capillary penetration of
• Always use the correct recommended chemical reactive releases for non-porous surfaces to insure best form
• Although cleaning a Tulsa overlay panel is much easier and quicker than traditional form material, it is important to
only use fiber spatulas and synthetic materials when cleaning forms to prevent damages to the faces, which might
occur with metallic tools.
• Although Tulsa overlay panels are very resistant to the abrasion and impact, as with any highly finished surface,
care must be taken during cleaning and use to prevent damage. Always use the appropriate vibrators and
techniques to protect the panel surface.

SENSO Formply Nelson Standard Film

SENSO Formply Nelson SIZES


  • 12 mm = 15 / 32’’

  • 15 mm = 19 / 32’’

  • 18 mm = 23 / 32’’


  • Width 1,22 mt = 4’’

  • Length 2,44 mt = 8’’

During manufacturing, panel humidity is controlled and stabilized to 8%.

Tulsa Standard Panels are certified by the American company TECO and fulfill the standards set in American PS 1-09.
The controls of the board production process of Tulsa Standard Film are certificated under the standards of the European
Community ENE 13986:2004 .

Tulsa Standard Panels are produced using phenolic resins with low polluting emission in accordance to European E-1

Please contact our sales team for more about detailed information regarding plywood products .

For more info on formply nelson and formply mitre 10 for formply masters, please take a look at these page :

affiliate line

Contact us directly :

SENSO Enterprise News


News Information
Leave a Reply

SENSO profile

Jiangsu Senso Building Materials Co.,Ltd. (SENSO) is one of largest manufacturer of plywood and related products in China, which was founded in 1995 with 6 subsidiaries. We are now enjoying 62 production lines of film faced plywood ,commercial plywood and LVL.......

More information

Contact us

  • SENSO center , Pizhou City,Jiangsu Province, China
  • 0086-516-86098999