formply mitre 10 and formply masters for formply kitchen

2018-10-02 06:00:21 formply mitre 10 399

Formply mitre 10 and formply masters for formply kitchen

plywood | film faced plywood | construction plywood  |  Formply

formply mitre 10

Designed to achieve concrete  forming that results  in exceptional surface finishes.

Allows  between 30 to 50 reuses (when reasonable  care in use and handling is taken).

Its faces have 130 gms/m2 phenolic film overlay + 205 mgs/m2 MDO film overlay, with a total of 335 mgs/m2 providing a high quality  that assures water resistance and stiffness stability.

64% Phenolic  resin in overlay film and 2% in MDO.

Also the optional of Non – Slip Film.


formply mitre 10 overlay are edge sealed during manufacturing. If you to cut during used, it is recommended that fresh edges be re-sealed to avoid panel damage caused by capillary penetration of humidity.

Use the appropriate form remover (same as recommended, chemical reactive releases form non porous surfaces).

Although cleaning a Tulsa Overlay Panel is much easier and quicker than traditional form materials, it is important to only use fiber spatulas and synthetic materials when cleaning forms to prevent damage to the faces which might occur with metallic tools.

Although Tulsa Premium Overlay panels are very resistant to the abrasion and impact, as with any highly finished surface, care must be taken during cleaning and use to prevent damage. Always use the appropriate vibrators and techniques to protect panel’s surface.



12 mm = 15 / 32’’

15 mm = 19 / 32’’

18 mm = 23 / 32’’


Width 1220 mm = 4ft

Length 2440 mm = 8ft


During its manufacturing, panel humidity is controlled and stabilized to 8%.


formply mitre 10 Panels are certificated by the American company TECO and fulfill the standards set in the American PS 1-95.


formply mitre 10 overlay panels are produced using phenolic resins with low polluting emission in accordance to

European E-1 norm

Please contact our sales team for more about detailed information regarding plywood products .

For more info on formply mitre 10 and formply masters for formply kitchen, please take a look at these page :

affiliate line

Contact us directly :



News Information
Leave a Reply

SENSO profile

Jiangsu Senso Building Materials Co.,Ltd. (SENSO) is one of largest manufacturer of plywood and related products in China, which was founded in 1995 with 6 subsidiaries. We are now enjoying 62 production lines of film faced plywood ,commercial plywood and LVL.......

More information

Contact us

  • SENSO center , Pizhou City,Jiangsu Province, China
  • 0086-516-86098999