Marine Plywood - best formwork plywood

2018-04-20 20:49:47 marine plywood 9011

marine plywood - SENSO.jpg

What is the marine plywood ?

Marine plywood is defined to be produced and must be in accordance with BS1088 marine plywood standards . That is up to E0/E1 grade and to be good waterproof glue with 72 hours boiling time. Marine plywood is also named as waterproof plywood and boating plywood. It is a good-quality, hardwood plywood made with waterproof glue. Better grades also tend to be lightweight, strong, and virtually free of defects. These qualities are what make this plywood a popular choice for building boats and boat parts.

It's also a smart option for durable outdoor furniture projects in coastal areas, especially after it receives a strong protective finish.

Marine plywood often produced by hardwood or okoume that is high-density woods.

Face and back is okoume bintangor ,birch ,pine .ect.

Why marine plywood use waterproof glue?

The main benefit of using waterproof glue in marine plywood is that if the plywood is exposed to moisture, or even very high humidity or boiling temperatures, the glue won't fail, and therefore the wood layers of the plywood won't delaminate, or fall apart. This is an important design characteristic if you're building, say, a boat hull with plywood.

If the hull's protective finish is damaged and the wood gets wet, the plywood will remain structurally intact.

marine plywood meets BS 1088-1: 2003 and BS 1088-2: 2003 standards with the BS1088 certificate.
The core has no voids, patches or gaps, glued with reinforced wbp. The careful selection of all layers, face and back veneers and special preservative insures you of a panel that is superior to any other okoume plywood. Now we are exporting roughly to 400cbm/month to clients in Australia, USA, New Zealand,Turkey, Northern Ireland, Italy and other regions.

Application of marine plywood

Marine plywood widely used in boating ,decks, coastal buildings ,outdoor wooden architecture, indoor gardening furniture, outdoor stage, large-scale decoration projects and kinds of building and decoration projects. High-grade furniture-making , wooden flooring base .


For more info on nmarine plywood, please take a look at these page :

affiliate line

https://en.wikipedia.org/wiki/Plywood

https://plywood-plywood.com

SENSO NEWS

 

News Information
Leave a Reply

SENSO profile

Jiangsu Senso Building Materials Co.,Ltd. (SENSO) is one of largest manufacturer of plywood and related products in China, which was founded in 1995 with 6 subsidiaries. We are now enjoying 62 production lines of film faced plywood ,commercial plywood and LVL.......

More information

Contact us

  • SENSO center , Pizhou City,Jiangsu Province, China
  • 0086-516-86098999
  • info@plywood-plywood.com
  • www.plywood-plywood.com